Pentruder MCCS is a truly modular system based on the wall saw track. The track is used both for the wire saw rig and for the drill rig, as well as for other more special set ups.
BTS-3 Base plate
Base plate for TS type tracks, triangular, 220 x 320 mm
BTS-4 Base plate
Base plate for TS type tracks, rectangular, 220 x 320 mm.
A wheel kit is available for the BTS-4 base plate.
Pentruder MCCS Universal Drill Rig
With the TS track, a BTS base plate and a CER-M3-U carriage we offer a light-weight, yet very stable drill stand for any kind of drill motor. A wheel kit for easy transport is available.
TS Single T-slot track
The TS track is used for wall sawing, wire sawing, drilling and other applications.
Fits base plates BTS3 and BTS4.
It comes in the lengths 0.85, 1.15, 1.7, 2.0, 2.3 and 3.45 meters.
TP3 Track stop
CEG-E-3P8 Carriage, Gliding, Electric, for 3P8
Carriage which glides on the track with teflon liners.
Electric automatic feed for 3P8 high frequency wire saw.
Total gear ratio 5000:1.
Max feed speed 0.4 m/min.
CEG-E-MD1 Carriage, Gliding, Electric, for MD1
Carriage which glides on the track with teflon liners.
Electric automatic feed for MD1 high frequency drilling machine.
Manual feed is not possible.
Total gear ratio 2500:1.
Max feed speed 0.8 m/min
CEG-M25 Carriage, Gliding, Manual feed
Carriage which glides on the track with teflon liners.
Manual feed. Lower carriage for 3P8 wire saw. Suitable for heavy drilling with big drill bits, chain sawing and more applications to come.
CEG-HY32 Carriage, Gliding, Hydraulic, for 3P8
Carriage which glides on the track with teflon liners.
Hydraulic automatic feed for 3P8 hydraulic wire saw.
Manual feed is not possible.
Use with PP15, PP20 or PP25.
Max carriage speed 1.0 m/min.
CEG-HY12.5 Carriage, Gliding, Hydraulic, for MD1
Carriage which glides on the track with teflon liners.
For drilling with hydraulic MD1 and for chain sawing.
Hydraulic automatic feed.
Manual feed is not possible.
Use with PP15, PP20 or PP25.
Max feed speed 2.7 m/min.
CEG-HY20 Carriage, Gliding, Hydraulic, for MD1
Carriage which glides on the track with teflon liners.
For drilling with hydraulic MD1and for chain sawing.
Hydraulic automatic feed.
Manual feed is not possible.
Use with PP15, PP20 or PP25.
Max feed speed 1.7 m/min.
CER-M3-MD1 Carriage, Rollers, Manual feed for MD1
Carriage with tapered rollers like on the wall saws.
Manual feed.
Coupling for MD1 drilling machine.
Gear ratio 3:1
CER-M-U Carriage, roller type, Universal, Manual feed
Carriage with tapered rollers like on the wall saws.
Manual feed for drill motors.
Gear ratio 3:1
CEL-TS
Carriage for line and corner drilling with TS type tracks
CT-CEL
Back support for CEL-TS
Hand crank for all CEG and CER Carriages
ERMD1 Extension adapter
Extension adapter for CEG, CER and CE1 carriages. Extends the drill bit capacity with 180 mm. More than one extension adapter can be used.
AE-MDU-MD1 Adapter plate for MDU on MD1
Adapter which is mounted on the MDU drive unit – NTGRA to be able to use the MDU drive unit with the CE1-70, CEG-M25 and CER-M3-MD1 carriages.
RST-TS1 Rear support for TS Track
When drilling with big diameter drill bits or deep holes, we recommend using a Rear support. On the picture it is shown with the MD1 drill system with MDU drive unit, MG41 gearbox, ST3 spindle unit, two ERMD1 extension adapters and the CEG-M25 carriage .
Length: 2.1-3.2 m.